3-3
3.3 Manual 2182 kHz Tuning Preset
For safety measure, it is required that 2182 kHz be tunable both automatically and manually.
The setup to enable manual tuning, in the event the antenna tuner system fails, is made
with the DIP switches in the antenna coupler. Call a coast station and tell your situation. Be
sure not to transmit during silent period (00 to 03 min. 30 to 33 min. of every hour).
1. Remove the top cover of the antenna coupler. Set the S1 switch (Coupler Board) to
AUTO.
AUTOMANUAL
Coupler Board
S1
switch
LED
(CR1-
CR8)
(In case of FS-2570,
under the shield plate)
Dip SW S4
DipSW S5
S6
LED (CR9-CR22)
S1 switch on the COUPLER Board
2. Turn the transceiver unit on.
3. Press the [1/RT/2182] key down for two seconds.
To Next Page
Loading...
