Furuno FS-1570 - Page 36

2-14
DPYCY-1.5, fabrication
Solder a vinyl wire.
Use crimp-on lugs,
pre-attached to the
terminal board in the
automatic antenna switch.
Fix the cable with the cable
gland at the vinyl sheath part.
Vinyl sheath
Armor
Vinyl
sheath
Conductor
S = 1.5 mm
φ = 1.56 mm
2
DPYCY-1.5, sectional view
Armor
Sheath
φ = 13.7 mm
RELAY board (location)
RELAY board
(05P0744)
TB4, 6
Transceiver unit
(FS-1570T)
Transceiver unit
(FS-2570T)
TB3, 5
RELAY board
(05P0744)
TB4, 6
TB3, 5