Need help?Do you have a question about the Furuno FW-200 and is the answer not in the manual?
General| Brand | Furuno |
|---|---|
| Model | FW-200 |
| Category | Marine Equipment |
| Language | English |
Crucial safety warnings and precautions for individuals operating the FW-200 unit.
Essential safety warnings and cautions for personnel installing the FW-200 unit.
Covers display methods (analog/digital) and modes (instantaneous/average, bearing types).
Details power supply specifications and compatible peripheral equipment.
Specifies the color finish for the Processor/Display Unit and Transmitter Unit.
Lists all components included in the complete package of the FW-200 system.
Details the available spare parts for maintenance and replacement of the FW-200.
Lists the necessary materials and hardware required for the installation of the FW-200.
Provides instructions and diagrams for mounting and connecting the transmitter unit.
Details the requirements and guidelines for wall-mounting the processor/display unit.
Explains the process of connecting cables to the transmitter unit's terminal board.
Details how to process and connect cables to the terminal strips of the processor/display unit.
Explains how to set DIP switch SW1 based on the interfaced device type.
Notes that DIP switch SW2 is reserved for factory use and should not be reset.
Explains how the FW-200 measures wind speed and direction relative to ship's movement.
Lists the types of wind and ship data that the FW-200 system displays.
Switches for selecting operating modes like Ship/Wind, Instantaneous/Average, and Bow/North.
Switches to set direction format (cardinal/degrees) and speed unit (knots/m/s).
Controls for adjusting the brilliance of the digital displays and backlighting.
Steps to set the unit for displaying ship's speed and heading information.
Steps to configure the unit for displaying true wind speed and direction.
How relative wind speed and direction are displayed on analog meters.
Describes the necessary switch settings on the FP-70 printer for data output.
Shows an example of the data that can be printed out from the FW-200.
Details changes made to the operator's/installation manual across different revision levels.
To Next Page
