APPENDIX 1 MENU TREE
AP-4
1
21
Bottom
Disrimination
ACCU-FISH
Sensor Setup
Initial Setup
General
Initial Setup
AIS
DSC
Tune Initialize (ON, OFF)
Random Pulse (ON, OFF)
ShowTarget IDs (ON, OFF)
Sector Suppression (ON, OFF)
Sector Start Angle (0 to 359)
Sector Angle (0 to 135)
Video Contrast (0, 1, 2, 3)
Antenna Heading Align (Opens heading alignment function)
Activate Range (NM) (0.1 to 50.0; default: 5)
Ignore Targets Slower Than (kn)(0 to 9.9; default: 1)
AIS SART Test (ON, OFF)
Receive ICOM Data (ON, OFF)
Target IDs
DSC Call
List
Delete after (100 calls, 12 h, 24 h, 48 h, 7 d)
Show Target IDs (ON, OFF)
On Time (Display only)
Tx Time (Display only)
Bottom Discrimination (Graphic Representation, Probability Graph)
Show Legend (ON, OFF)
Speed (-50% to 50%, default: 0%)
Name (Input via software keyboard)
Color (Select from list)
Fish Size (in) (4 to 78)
Depth (ft) (16 to 328)
Surface/Bottom (Surface, Bottom)
Symbol (Select from: , , , )
LF Echo Offset (-50 to 50, default: 0)
HF Echo Offset (-50 to 50, default: 0)
LF Bottom Level (-100 to 100, default: 0)
HF Bottom Level (-100 to 100, default: 0)
Acoustic Speed (m/s) (-50 to 50, default: 0)
Temp (°F) (-17.8 to 17.8), default: 0)
ACCU-FISH Symbol (Small, Large, Off)
ACCU-FISH
Filter 1
ACCU-FISH Filter 2 to 4 (Same as Filter 1)
ACCU-FISH Info (Off, Fish Size, Depth)
Draft (ft) (0.0 to 55.4)
Transmission Power (High, Low)
Transducer Current Transducer (Select from list)
Transmit Rate (Auto, Manual; 0 to 20)
Offsets*
Smoothing (ON, OFF)
Source (DRS4W, blank)
Day Background Color (Black, DarkBlue, White)
Night Background Color (Black, DarkBlue)
Echo Color (Multicolor, Green, Yellow)
Show Range Slider (ON, OFF)
Bearing Scale Mode (True, Relative)
EBL Reference (True, Relative)
Depth Indication (Large, Small, Off)
Calibration
Restore
Defaults
Radar
AIS and
DSC
Restore Default Settings (Select Yes/No from pop up window)
Restore
Defaults
Restore Default Settings (Select Yes/No from pop up window)
Restore
Defaults
Restore Default Settings (Select Yes/No from pop up window)
*: For CHIRP transducers, the
[
Offsets
]
menu appears as follows:
Offsets Gain (-50 to 50, default: 0)
Bottom Level (-100 to 100, default: 0)
APPENDIX 1 MENU TREE
AP-5
1
1
Notifications
General
Navigation
Tanks
Wind
AIS
Fish and
Bottom
Buzzer (ON, OFF)Buzzer Sound
Grounding (ON, OFF)
Grounding Depth (ft) (0 to 65.6; default: 32.8)
Depth Range (ft) (0 to 65.6; default: 32.8)
Depth (ON, OFF)
Anchor (ON, OFF)
XTD (ON, OFF)
Arriving at Destination (ON, OFF)
HDOP (ON, OFF)
Own Ship Speed (ON, OFF)
Surface Temperature (ON, OFF)
Tank Notification (ON, OFF)
Same as Tank 0
Notification Percentage (5% to 50%; default: 30%)
Temperature Shear (ON, OFF)
Tank 0
Tank 1
Tank 2
Tank 3
Tank 4
Tank 5
Shear Range (°F) (0 to 35.98)
Tanks On Board (1 to 6; default: 2)
Trip Meter (ON, OFF)
Max TWS (ON, OFF)
Max TWS Value (kn) (0 to 194.2; default: 19.4)
Low AWA (ON, OFF)
Min AWA Value (P°) (P1° to P180°; default: P60°)
High AWA (ON, OFF)
CPA (ON, OFF)
CPA Value (NM) (0.1 to 50; default: 5)
TCPA (ON, OFF)
TCPA Value (1 min to 120 min; default: 10 min)
Max AWA Value (S°) (S1° to S180°; default: S60°)
Max Trip Distance (NM) (0 to 5399; default: 54)
Own Ship Min Speed (kn) (0 to 1049.5)
Own Ship Max Speed (kn) (0 to 1049.5)
Same as Tank 0
Same as Tank 0
Same as Tank 0
Same as Tank 0
Min Temperature (°F) (516.47 to 710.83)
Type (
Fuel, Fresh Water, Live Well, Waste Water,
Black Water
; detected automatically)
Max Temperature (°F) (516.47 to 710.83)
Within /
Outside
Within /
Outside
Allowed HDOP (0 to 10)
Anchor Radius (NM) (0 to 5.4; default: 0.5)
Arrival Radius (NM) (0.01 to 0.54; default: 0.05)
Min Depth (ft) (0 to 32808.1)
Echo Strength (High, Medium, Low)
Fish
Notification
Fish
Notification
(BL)
Fish Size Notification (ON, OFF)
Notification (ON, OFF)
Depth (ft) (0 to 3937)
Range (ft) (0 to 3937; default: 16)
Notification (ON, OFF)
Depth (ft) (0 to 3937)
Range (ft) (0 to 3937; default: 16)
Interval (Short, Long, Continuous)
Seabed
Type
Notification
Seabed Type Notification (ON, OFF)
Seabed Type (Mud, Sand, Gravel, Rock)
Probability (50 to 90; default: 70)
Restore
Defaults
Restore Default Settings (Select Yes/No from pop up window)
To Next Page
Loading...
