Need help?Do you have a question about the Furuno GP-3500 and is the answer not in the manual?
Detailed explanation of the display unit and remote controller buttons and functions.
Instructions for inserting and using chart cards for map display.
Step-by-step guide on how to power the unit on and off, including startup sequence.
Functionality for marking the Man Overboard position.
Overview of the plotter and pilot display options, including full-screen and half-screen.
How to enable or disable the display of own ship's and other ships' tracks.
Procedures for pausing, resuming, and managing track recording.
How to set the method and interval for recording ship's track data.
Instructions for adding marks to the chart at various positions.
Methods for inputting waypoint data, such as at own ship's position or by coordinates.
Methods for creating routes using existing waypoints or ship's track.
Instructions for setting and navigating to quick points.
How to set a waypoint as a destination for navigation.
Procedures for following a pre-defined route for navigation.
Configuration for arrival and anchor watch alarms.
Settings related to chart display, offset, and details.
Customization options for the plotter display, including TD display and dimmer.
Settings for display modes, language, and unit preferences.
Configuration settings for the GPS receiver and navigation data sources.
How data is stored in the unit's memory and its configuration.
Procedures for formatting, saving, displaying, playback, and deleting data on memory cards.
Essential maintenance checks and cleaning procedures for different unit parts.
Common problems and their solutions for general and plotter issues.
To Next Page
General
