The 2 DIN unit with an extra large
monochrome LCD displays a variety of
information with large easy-to-read
characters and graphics. The large control
knob allows for precise course changing
and straightforward menu selecting.
The compact and waterproof 1 DIN unit FAP-6011/5011 can be
installed anywhere on any type of boat. Its clear LCD indicates
important navigational information, including rudder information.
A handheld control unit allows for full
operation of autopilot from anywhere
onboard. Its clear LCD displays
various navigation information to
assist you in steering your boat.
FAP-5001 for NAVpilot-500
Extra large monochrome LCD
85 mm (W) x 85 mm (H)
3.4" (W) x 3.4" (H)
FAP-6011 for NAVpilot-611
High-resolution monochrome
LCD
85 mm (W) x 43 mm (H)
3.4" (W) x 1.7" (H)
FAP-5021 for NAVpilot-520
Handheld control unit
85 mm (W) x 43 mm (H)
3.4" (W) x 1.7" (H)
FAP-5011 for NAVpilot-511
High-resolution monochrome
LCD
85 mm (W) x 43 mm (H)
3.4" (W) x 1.7" (H)
NEW
FAP-6011 is a new NAVpilot display/controller, its appearance
completely matches with FURUNO FI-50 series instruments and
NavNet 3D when they are installed side by side.
Flush mounting can be achieved for FAP-6011 by replacing of the
front panel. Using the optional supplied front panel, flush mounted
units protrude less than 10mm from the bulkhead.
Flash mount kit for FAP-6011
NEW
To Next Page
Loading...
Need help?
General
