EasyManua.ls Logo

Furutech DF-2 - Package Contents; Description

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Package Contents
LP Flattener (DF-2) x 1
Heater Plate protective cloth x 1
Manual x 1
Caution note x 1
Power cable x 1
Duster x 1
2. DF-2 Description
The DF-2 Flattener is designed to flatten LPs that have warped over time but not those that have been
heat damaged. This is an improved version of the previous DFV-1 and has been carefully designed to
flatten heavier LPs with no beads on their outer circumference. The DF-2 has improved time and
temperature control to lessen the influence of seasonal temperature changes on the heating process.
Caution: Before attempting to flatten any rare or valuable LPs, please test and become familiar with the
operation of the DF-2 on an LP of no value. Results cannot be guaranteed and LPs cannot be returned to
perfect condition.
Generally there are three types of LP discs (33 1/2 rpm):
1. Lightweight LPs (120g approx.)
2. LPs with groove guards: All but a few manufacturers’ LPs are treatable.
Note: The following LPs should not be treated in the DF-2.
LPs weighing less than 110g
Light LPs that were manufactured between 1973-74 (Oil crisis)
weights range from 100g to 115g.
3. Conventional middleweight LPs (140g approx.)
LPs with groove guards: All but a few manufacturers’ LPs are treatable.
4. Heavyweight LPs (190g approx.)
Heavy LPs without groove guards are now treatable.