EasyManuals Logo

FuseBox TD1 User Manual

FuseBox TD1
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
After installation and testing of this product it is essential that the INSTRUCTION LEAFLET is available for reference
TD1 Time Switch
Instruction Leaflet DOCTD12021
1 Technical information 1a Dimensions
Connections (VOLTAGE FREE CONTACTS)
1b Time Switch must be installed by a qualified electrician in accordance
with the current IET Wiring Regulations BS 7671.
1c Total load must not exceed the rating of the time switch or any additional
limitation.
1d For loads greater than above, we recommend an installation contactor is
used, switched by the TD1 Time Switch.
BUTTON FUNCTIONS
BUTTON
FUNCTION
ON LED
Illuminates when switching program is on
Program button
Clock /Time button
D+
Day
H+
Hour
M+
Minute
RESET
CAUTION This will DELETE ALL settings!
By pressing D+ and H+ for 3sec this will also
delete all settings!
MANUAL
Manual switch for the following settings:
ON, ON AUTO, OFF, AUTO OFF
Rating (A)
16A/250V AC resistive load
4A/250V AC inductive load
Voltage(V)
220-240V 50/60Hz
IP RATING
IP20 EN 60529
Mounting
35mm top hat din rail
Torque (switch terminals)
0.8Nm
Maximum cable
4mm²
Memory locations
16 ON 16 OFF
Power consumption
7.5VA
Display
LCD
Minimum setting
1 minute*
Bell function
*30s (set ON and OFF time the
same)
Contacts
1 changeover contact (3,4,5)
Battery
Lithium battery, 150H reserve
Ambient temperature
-10~ +40
Ambient humidity
35~85%RH
Weight
150g
Accuracy
≤2sec/day(at25)
Complies with
EN 60730
IMPORTANT
VOLTAGE FREE CONTACTS
L N
SUPPLY
LOAD
VOLTAGE FREE
CONTACTS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FuseBox TD1 and is the answer not in the manual?

FuseBox TD1 Specifications

General IconGeneral
BrandFuseBox
ModelTD1
CategoryTimer
LanguageEnglish