Fusion 782-1728 - Operating Tips and Storage

18
Operating Tips and Storage
•Idealstoragetemperaturerangefortheinverteris0-40°C
(32-104°F).
•Storeanduseinacool/dryplacewithadequateventilationfor
ideal ventilation.
•Avoidlocationsexposedtoheatingunits,radiators,direct
sunlight, or excessive humidity or dampness.
•Storeandusetheinverterinaclearwellcirculatedarea.
•DO NOT place items on or over the inverter during operation.
(Especially liquids)
•DO NOT allow any liquids to come into contact with the inverter.
•Keepinverterawayfromdirectexposuretosunlight
when possible.
• DO NOT locate inverters in an area, room or compartment
where explosives or flammable fumes might be present, such
as engine rooms, engine compartments, and boats or small,
unventilated battery compartments.
• Atleastthreeinchesofclearancefromotherobjectsshouldbe
maintained for cooling airflow.
• TheunitshouldbeasclosetotheDCpowersourceaspossible.
NEVER connect the chassis ground wire from the inverter to the
DC negative input.
• CHECK to ensure that the combined loads of the appliances
being powered by the inverter. DO NOT continuously exceed
the inverter's wattage rating.
InverterManual_012411.indd 18 1/31/11 8:43:22 AM