Need help?Do you have a question about the Fusion 782-2232 and is the answer not in the manual?
Defines DANGER, WARNING, and CAUTION terms for hazardous situations.
Lists essential safety instructions to prevent electric shock, fire, and injury.
Covers fire risk, injury, property damage, ventilation, and proper usage.
Details restrictions on connecting to wiring, immersion in water, and specific appliance types.
Warns about potential damage to inverter or charging circuit when using rechargeable devices.
Details the DC input plug and LED indicators for 80W, 400W, and 750W models.
Describes the DC input terminals and cooling fan for 400W and 750W models.
Explains the LED indicators, power button, and USB port for 400W and 750W models.
Details the AC outlets, USB port, and ventilation openings for 80W, 400W, and 750W models.
Illustrates and describes the DC cable connection for 400W and 750W models.
Shows the front and rear panels of digital display models (1000W-3000W).
Explains AC outlets, digital readout, power button, ports, LEDs, and terminals for digital models.
Details over/low voltage shut-off, low voltage alarm, and over-heating protection.
Explains the 'modified sine wave' output and its suitability for various loads.
Compares 'sine wave' and 'modified sine wave' with visual representation.
Provides a step-by-step guide for connecting the inverter to a DC power source.
Details turning on the inverter, plugging in appliances, and voltage cautions.
Advises on vehicle battery limitations and deep discharge battery use.
Outlines cable size, connectors, and grounding requirements for permanent installation.
Discusses connecting to AC outlets and distribution wiring restrictions.
Guides on connecting USB-powered devices to the inverter's USB port.
Provides ideal temperature ranges and locations for storing and using the inverter.
Covers clearance, proximity to power source, and load checks for optimal operation.
Lists approximate wattage needs for various common appliances and devices.
Details how to connect the ground terminal to the vehicle chassis for in-vehicle use.
Explains grounding the inverter to the battery's negative terminal for out-of-vehicle use.
Specifies recommended wire gauge and connection points for chassis grounding.
Explains the basic function and purpose of a power inverter.
Discusses using inverters for emergency backup power in a home setting.
Guides on selecting an inverter based on wattage, surge load, and continuous rating.
Provides formulas for calculating wattage and starting loads for inverter selection.
Compares modified and true sine wave inverters and their applications.
Explains how to connect and use small and large inverters, including wiring.
Provides cable size and length recommendations for higher wattage inverters.
Discusses battery condition, type (deep cycle vs. standard), and handling precautions.
Explains how to connect multiple batteries in parallel or series for increased capacity.
Diagram showing two 12V batteries connected in parallel to the inverter.
Diagram showing two 6V batteries connected in series to the inverter.
Addresses weatherproofing, lightning storms, and marine environment usage.
Covers battery condition, vehicle running, load limits, and surface placement.
Details continuous operation inside a vehicle and engine starting recommendations.
Warns against engine compartment installation and emphasizes proper wire choice.
Chart showing estimated operating time based on load and battery capacity.
Discusses potential interference issues with audio and video equipment.
Provides a quick reference table for common problems and solutions.
Addresses issues related to measured output and unexpected battery run times.
Lists AC output voltage, power, frequency, and waveform for 80W, 400W, 750W models.
Details DC input voltage, battery drain, alarm points, and fuses for 80W, 400W, 750W.
Lists AC/DC specs including voltage, power, frequency, waveform, and input range for 1000W-3000W.
Explains the meaning of digital display codes like LUP, OUP, OPP, OLP, OCP.
Describes the optional remote switch for controlling the inverter ON/OFF.
Outlines the 1-year limited warranty against defects in material or workmanship.
Details the policy for returning defective products for repair or replacement.
To Next Page
General