Need help?Do you have a question about the Fusion 782-2233 and is the answer not in the manual?
Defines DANGER, WARNING, and CAUTION terms for hazard communication.
Details LED indicators for 80W, 400W, and 750W inverter models.
Describes DC input terminals and ventilation for 400W and 750W models.
Instructions for connecting the DC cable with clips for 400W and 750W models.
Introduces features of 1000W, 1500W, 2000W, and 3000W digital display models.
Details AC outlets, digital readout, ports, buttons, and terminals for digital models.
Explains shut-off and alarm functions for voltage and temperature protection.
Compares modified sine wave output to standard sine wave and measurement methods.
Step-by-step guide for connecting the inverter to a power source.
Cautions on voltage drops, battery usage, and cable recommendations.
Details wiring, cable gauge, and grounding requirements for permanent installation.
Guidelines for connecting appliances and warnings about AC distribution wiring.
Instructions for connecting devices to the USB charging port.
Best practices for operating and storing the inverter for optimal performance.
Lists approximate wattage requirements for various appliances.
Explains how to ground the inverter for in-vehicle and out-of-vehicle applications.
Details recommended wire gauge and connection points for chassis grounding.
Explains the basic function and use of power inverters.
Discusses using inverters for home emergency backup power.
Guides on selecting an inverter based on wattage, surge, and continuous load.
Compares the two types of inverter output waveforms and their applications.
Differentiates usage for small (cigarette lighter) and large (hard-wired) inverters.
Provides cable gauge recommendations and advice on choosing suitable batteries.
Explains how to connect multiple batteries in parallel or series for increased capacity.
Illustrates 12V parallel and 6V series battery configurations.
Provides formulas to estimate device runtime based on battery and load.
Addresses weather resistance and general safety advice for inverter use.
Guidelines for continuous operation and precautions for installation and wiring.
Chart showing estimated operating times based on load and battery capacity.
Addresses potential interference with audio systems and televisions.
Quick reference for problems like no power, red LED, or overload shutdown.
Solutions for low battery voltage, overheating, and shutdown issues.
Solutions for water entry, alarms, low measured output, and short battery run time.
States the DC output voltage for the USB port.
Details AC output voltage, power, frequency, and waveform for models.
Details DC input voltage, battery drain, alarm points, and fuses.
Details AC/DC specifications for 1000W, 1500W, 2000W, and 3000W models.
Explains digital display codes for low voltage, over voltage, short circuit, and protection.
Describes the optional remote switch for controlling the inverter.
Outlines the 1-year limited warranty, exclusions, and return/repair policy.
To Next Page
General