EasyManuals Logo

Fusion CA-ML700BT User Manual

Fusion CA-ML700BT
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
ADDITIONAL MEDIA PLAYBACK
FUNCTIONS (USB/SD)
PLAY OPTIONS
MP3/WMA File or Folder Search
• Press the BAND button on front panel access the MP3/
WMA le search mode.
Rotate the Encoder Volume Control to search through all
folders on the device then press ENTER to make your selection.
Rotate the Encoder Volume control to select the desired
track within the previously selected folder and press ENTER
to start it playing
INTRO PLAY
• During playback, press the INT button (Preset button 2)
to start intro mode. The rst 10 seconds of all tracks on the
storage media will be played.
Once you have nd a track you like, press INT again to
resume normal playback.
ADVANCED OPERATION
If the device also supports Audio Video Remote Control
Prole (AVRCP), you can control basic playback functions
(eg iPod music) via the head unit.
1. Follow steps 1 & 2 above as per Basic Operation
2. Press to start playback. Press again to pause.
3. Press either to advance to the next track, or
return to the beginning of the track.
4. Depending on the device, volume adjustment may be
possible from the device. Please ensure it is not set too
high to avoid distortion.
NOTE
ID3 type information – Title, Artist, Album etc is not available on
the LCD screen in Bluetooth A2DP mode.
DISCONNECTING THE BLUETOOTH DEVICE
1. If the Bluetooth device is paired and you want to
disconnect it from the CA-ML700BT, press MENU to
enter the System Menu. Keep pressing until [DISCONN>]
is displayed.
2. Press ENTER on the Encoder Volume Control.
[WAITING] will be displayed on the LCD display,
followed by [DISCONNECTED] when completed.
RE-CONNECTING THE BLUETOOTH DEVICE
Once paired, the phone should re-connect automatically
every time you use the system. If not, or you have
previously Disconnected the phone, you can manually re-
connect it using the following steps. 1. Press MENU to
enter the system menu.
Keep pressing until [CONNECT>] is displayed.
2. Press ENTER on the Encoder Volume Control.
[WAITING] will be displayed on the LCD display, followed
by [CONNECTED] when completed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fusion CA-ML700BT and is the answer not in the manual?

Fusion CA-ML700BT Specifications

General IconGeneral
BrandFusion
ModelCA-ML700BT
CategoryCar Receiver
LanguageEnglish

Related product manuals