Fusion MS-WR600 - User Manual

USER / INSTALLATION MANUAL
MARINE WIRED REMOTE CONTROL
MS-WR600
www.fusionelectronics.com
FUSION Electronics New Zealand Ph: +64 9 369 2997
FUSION Electronics Australia Ph: +61 1300 736 012
FUSION Electronics Europe Ph: +44 1268 889580
FUSION Electronics USA Ph: +1 623 580 9000
PUBLISHED BY FUSION ELECTRONICS LIMITED:
©Copyright 2008 by FUSION Electronics Limited. All rights reserved.
Specifications and design are subject to change without notice.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non-
working electrical equipment to an appropriate waste disposal center.
COMPATIBLE WITH MS-CD600, MS-AV600 AND MS-IP600

Fusion MS-WR600 Specifications

General

Brand	Fusion
Model	MS-WR600
Category	Remote Control
Water Resistance	IPX7
Power Source	Battery
Battery Quantity	2
Compatibility	Fusion Stereo
Operating Temperature	0° to 50° C
Range	10 m

Summary

Button Description

Power Button

Press to turn the unit ON/OFF.

Source Selection

Press to select the desired source like Radio, DVD/CD/MP3, iPod, or AUX.

Mute and Configuration

Short press mutes/un-mutes. Press and hold to enter configuration menu.

Menu Navigation

Press to enter menu system or return to previous screen.

Play;Pause Control

Play/Pause track in DVD/CD/MP3 and iPod mode.

Rotary Encoder Operation

Turn to adjust volume/navigate menus. Press to select/confirm settings.

Track Navigation

Short press for next/previous track. Press and hold to fast forward/rewind.

Operation

Assigning Remote to Zone

Assign the remote to a specific zone (1, 2, 3, or 123) via the Mute button.

Sub Limit Adjustment

Adjust the Sub Limit level using the Menu and Rotary Encoder.

Zone Volume Control

Adjust the volume for the assigned zone using the Rotary Encoder.

Backlight Brightness Control

Adjust backlight brightness by holding Menu and turning Rotary Encoder.

Installation

Option 1: Recommended Installation

Recommended installation method for the wired remote control.

Option 2: Y Splitter Installation

Requires a Y Splitter Cable; ensure equal cable lengths for correct operation.

Optional Accessories

Lists optional accessories like extension leads and Y splitter cables for expanded functionality.