To Next Page
A
ashleymclaughlinJul 30, 2025
What to do if I cannot connect to Fusion PartyBus devices on the network?
- AAriel PalmerJul 30, 2025
If you are unable to see or connect to Fusion PartyBus devices on the network, try the following: * Ensure only one device (stereo or router) is set as a DHCP server. * Confirm all Fusion PartyBus devices, network switches, routers, and wireless access points are connected and powered on. * Make sure wireless Fusion PartyBus devices are connected to a wireless router or access point. * Try changing the channel on your router or access point to resolve interference. * Disconnect Bluetooth devices to check for interference. * Verify each device has a unique IP address with matching first three number sets, and identical subnet masks. * You can also reset all network settings to their factory default values.
General
