How to assign a Fusion Marine Radio stereo using the source button?
During the initial installation, the remote control needs assignment to a stereo on the network. Press the Source button to see a list of Fusion stereos. Then, choose your stereo from the list.
What to do if my Fusion Marine Radio stereo is offline?
If your stereo is offline, check the power connection to the stereo.
What to do if my Fusion Marine Radio is waiting for stereo?
If your device displays 'Waiting for stereo', wait for the stereo to power on.
What to do if my Fusion Marine Radio is waiting for network check connections?
If your Fusion Marine Radio displays 'Waiting for network check connections', check all network connections.
Details the physical layout of the control panel with labeled components.
Explains the function of each button on the remote control.
Details how to install the remote using a Fusion network.
Details the procedure for turning the remote control and stereo on/off.
How to control audio volume using the rotary encoder.
Details how to set up and use the NMEA repeater mode.
General| Type | Remote Control |
|---|---|
| Brand | Fusion |
| Model | MS-NRX200i |
| Category | Remote Control |
| Wireless | Yes |
| Power Source | Battery |
| Operating Voltage | 3V |
To Next Page
