EasyManua.ls Logo

FUST PRIMOTECQ TW730E - Daily Use

FUST PRIMOTECQ TW730E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mixtures and synthetics for pro-
grammes in Synthetik (Synthetics) pro-
gramme group.
Sort by care label: The care labels mean:
Drying in the tumble dryer possible in
principle
Drying at normal temperature
Drying at reduced temperature
Drying in the tumble dryer not possi-
ble
Important! Do not place in the appliance
any wet laundry which is not specified on
the care label as being suitable for tumble-
drying.
This appliance can be used for all wet laun-
dry items which are labelled as suitable for
tumble-drying.
Do not dry new, coloured textiles togeth-
er with light-coloured laundry items. Tex-
tile colours may bleed.
Do not dry cotton jersey and knitwear
with the Extratrocken (Extra Dry) pro-
gramme. Items may shrink!
Wool and wool-like textiles can be dried
using the Wollpflege (Wool Care) pro-
gramme.
Preparing laundry
To avoid laundry becoming tangled:
close zips, button up duvet covers and
tie loose ties or ribbons (e.g. of aprons).
Empty pockets. Remove metal items (pa-
per clips, safety pins, etc).
Turn items with double-layered fabrics in-
side out (e.g. with cotton-lined anoraks,
the cotton layer should be outermost).
These fabrics will then dry better.
Important! Do not overload the appliance.
Observe max. loading volume of 7 kg.
DAILY USE
Switching appliance on
Turn the programme dial to one of the pro-
grammes. The appliance is on.
Operating
21 3
4 5
Intensiv (Intensive)
If the laundry is still damp after a standard dry-
ing programme, you can increase the drying
result by using the Intensive function.
Extra Knitterschutz (Long anticrease)
prolongs the anti-crease phase to 90 mins in
total. The laundry remains relaxed and free of
creases.
Signal (Buzzer)
audible confirmation of:
•cycle end
anti-crease phase start and end
cycle interruption
error
Startzeitvorwahl (Delay Start)
allows to delay the start of a drying pro-
gramme: 3 or 6 or 9 hours
1. select the drying programme and addition-
al drying options
2. press the Delay button repeatedly until the
desired delay start is chosen
3. to activate the delay timer, press the Start/
Pause button
Starting the programme
Press Start/Pause button to start the dryer
after having selected the programme and
the options. The relevant light will stop
flashing. If the programme selector dial is
turned to another position, when the ma-
chine is running, the buzzer will sound and
the programme phase indicator lights will
flash. The drum turns alternately in both di-
rections during drying.
All drying programmes end with a 10 mi-
nute cooling phase. You may remove the
laundry after this phase.
51

Related product manuals