FUTABA 9CAP - Contents and Technical Specifications; Transmitter T9 C Specifications; Receiver and Servo Specifications

•
9C Transmitter, including RF module
1
(TP)
•
R148DF Receiver or R149DP Receiver
•
Servos, S3004, S3001 or S9001, with mounting hardware
and servo arm assortment
•
Switch harness
•
Aileron extension cord
•
110V wall charger (North America)
•
Frequency Flag
Transmitter T9C
Operating system: 2-stick, 9 channels, PCM1024 system
Transmitting frequency: 50, 72 or 75 MHz bands
Modulation: FM/PPM or PCM, switchable
Power supply: 9.6V NT8S600B Ni-Cd battery
Current drain: 280 mA
Receiver R149DP
(PCM Dual conversion)
Receiving frequency: 50 or 72 MHz bands
Intermediate freq.: 10.7 MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 14 mA
Size: 1.28 x 2.17 x 0.82 (32.6 x 55.0 x 20.8 mm)
Weight: 1.22 oz (34.5 g)
Channels: 9
Receiver R148DF
(FM Dual conversion)
Receiving frequency: 50 or 72 MHz bands
Intermediate freq.: 10.7MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 14 mA
Size: 1” x 2.2” x .9” (25.4 x 55.8 x 22.9 mm)
Weight: 1.1 oz (31.18 g)
Channels: 8
Servo S9001 (Coreless motor)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 54.2 oz-in(3.9 kg-cm) at 4.8V
Operating speed: 0.22 sec/60 at 4.8V
Size: 1.59 x 0.78 x 1.41 (40.4 x 19.8 x 36 mm)
Weight: 1.69 oz (48 g)
Servo S3001 (Standard, ball-bearing)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 41.7 oz-in (3.0 kg-cm)
Operating speed: 0.22 sec/60
Size: 1.59 x 0.78 x 1.41 (40.4 x 19.8 x 36 mm)
Weight: 1.59 oz (45.1g)
Servo S3004 (Standard, ball-bearing)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 44.4 oz-in (3.2 kg-cm)
Operating speed: 0.23 sec/60
Size: 1.59 x 0.78 x 1.41” (40.4 x 19.8 x 36 mm)
Weight: 1.30 oz (38 g)
1
Transmitter band may only be changed by changing the module. Contact
Futaba Service Center regarding adjustability of receiver band. Band
cannot be changed by simply changing crystals.
9
CONTENTS AND TECHNICAL SPECIFICATIONS
(Specifications and ratings are subject to change without notice.)
Your 9CAP or 9CHP (packaged with a 9-channel PCM receiver), 9CAF or 9CHF (packaged with an 8-channel FM
receiver) system includes the following components: