GUARANTEE
Your NEW FUTABA Digital Proportional R/C system is guaranteed against defects in
workmanship and material for 180 days from the date of purchase when the attached
registration card is returned to us within ten days of purchase.
This Guarantee is null and void if the R/C system has been improperly handled,
damaged in a crash, or tampered with and does not cover the replacement of plastic
housings or electronic components damaged due to the use of improper voltages.
When service is required, please take your equipment to your local authorized service
station or ship it directly to us. All postage, shipping, and insurance changes must be
paid by the user.
This guarantee only applies to the continental U.S.A., Hawaii, and Alaska.
This factory repair service applies only to the continental U.S.A., Hawaii, and Alaska.
To insure prompt service, please follow the instructions given below.
1. Charge the batteries for at least 18 hours prior to shipment.
2. Return the system only. Not your complete installation. Remove the servos from their mounts
and remove the foam padding from the receiver.
3. Plugs or other modifications which interfere with factory test procedures will be returned to
factory standard at your expense.
4. Carefully pack all components individually, using sufficient packing material to prevent damage
during shipment.
5. Include a brief but thorough explanation of all problems and service required and tape it to
the back of the transmitter. Place a label describing the functions of the servo on each servo.
6.
Be
sure
to
include
your
full
address
and
zip
code inside the box
as
well
as
on
the outside.
7. Include a packing list of all items being returned, and double check to make sure that all items
are packed.
8. Upon receipt of damaged equipment at the FUTABA factory, an estimate of the cost of repair
will
be
sent
to
you.
Your
equipment
will
then
be
repaired and returned
to
you
upon
receipt
of
payment.
FACTORY REPAIR SERVICE
To Next Page
Loading...
