FUTABA FP-3PB User Manual

Futab:
DIGITAL PROPORTIONAL
T RADIO CONTROL
D60917
BS 5 DS
s cs SoS KSSS >
— PS
CONTENTS -
FEATURES Heese: 1
CONTENTS AND RATINGS..-2
PCM1024
@PCM 1024 system is a high-resolution, BEFORE USING-::----------------- 4
fast-response 3-channel digital
proportional R/C set for experts. BASIC SETTINGS © 6
@This digital propo-tional R/C set FUNCTIONS AND |
is for land (moto car, engine car) SETTING METHOD ==» U UUT Y 8
and water (moto! boat, engine
boat) use. FAIL SAFE FUNCTIONS -------- 10
RECOMMENDED USAGE EXAMPLES-3
OTHER FUNCTIONS -------- 11
| USING THE ACCESSORIES----12
NOMENCLATURE (FOLDOUT)--:-14
SERVO EXPLODED VIEWS: :--16

FUTABA FP-3PB Specifications

General

Brand	FUTABA
Model	FP-3PB
Category	Remote Control
Language	English

Summary

BEFORE USING

Loading the transmitter battery

Procedure for inserting and loading penlight batteries into the transmitter.

Changing the RF MODULE band

Steps to remove, change crystal, and install the RF module for frequency adjustment.

Receiver and servos connections

Illustrates connection diagrams for receivers and servos in different setups.

Receiver and servo precautions

IMPORTANT: Receiver Antenna Routing

Guidelines for optimal antenna routing to ensure maximum range and prevent interference.

General Precautions

BASIC SETTINGS

Transmitter normal settings

Steering adjustment

Explains how to set steering linkage direction and neutral position.

FET amp adjustment

Neutral adjustment

Procedure to set the neutral point for the speed control using the monitor lamp.

High point adjustment

Setting the high point trimmer to change monitor lamp color from green to red.

Power curve adjustment

Adjusting the power curve while running for finer control.

FUNCTIONS AND SETTING METHOD

Functions convenient at linkage adjustment

Mixing function

Functions convenient when running

Steering CH1 adjustments

Throttle CH2 adjustments

FAIL SAFE FUNCTIONS

Fail Safe That Protects the R/C Car Against Unforeseen Accidents

Overview of runaway prevention through F/S and B. F/S functions.

F/S function setting

Steps to select and set the Fail Safe (F/S) function and throttle position.

B. F/S function setting

Procedure to select and set the Battery Fail Safe (B. F/S) function.

OTHER FUNCTIONS

NOMENCLATURE

Transmitter controls and indicators

Setting switches and trimmers

Display Functions