FUTABA FP-3PB User Manual

USING THE ACCESSORIES
WHook band
When the hook band is used, grip is stable and operation is easier.
i Install the hook band. Ea Fasten with the hook band.
Sir
Hook band installation fixture
Magic tape (Velcro)
W Grip adapter
Use the grip adapter, as preferred.
Fit the grip adapter to the set.
Grip adapter
WESPLINED HORN
neutral position at the servo horn relative to baseline A. turn the arm
side.
Setting and shifting the neutral position.
a) Angle division
~ l
Baseline A
1
2!
ee
To shift the holes center line to the
right (clockwise) relative to baseline counterclockwise and set arm 2 to
A. shift arm 2 to the arm 1 position the position of arm 1. The adjusta-
and set it to the position closest to ble angle is
1) The number of segments per spline the basline A. 60°-(14.4° x 4)=2.4°
is 25. The amount of change per [Example] For a four srm horn, the Arm 3 shifts 4.8° to the right, and
segment is 360+25=14.4". angular shift per segment is 14.4’. 6 shifts 2.4° to the left, and arm
2) The minimum adjustable angle is The shift to the right is 4 shifts 7.2° to the right and left.
determined by the number of arms 90°—-(14.4°x6)=3.6
or number of axes of the holes. To shift by the same angle in the |
For four arms, opposite direction, use the opposite
360° (25x4) -3.6 arm number. |
' Number of divisions _ For a six arm horn, to shift the holes
@SPLINED SERVO HORNS
HORN A HORN B HORN C HORN D
(FSH-6X) (FSH-6S) (FSH-6R) (FSH-6W)
HORN G

FUTABA FP-3PB Specifications

General

Brand	FUTABA
Model	FP-3PB
Category	Remote Control
Language	English