• SET CONTENTS AND RATINGS
Set name
Transmitter
Receiver
Servo
Landing gear servo
Switch
NiCd battery
Accessories
FP-8JN
FP-T8JNx1
FP-R8JX1
FP-S121x4
FP-S121Gx2
R4-SWJx1
NR-4Hx1
Charger, extension cord, landing gear adapter,
DSC cord, ribbon, horn, servo tray
Transmitter FP-T8JN
Operating system
Transmitting frequency
Modulation system
Power requirement
Current drain
: Two-stick, 8 channels
: 27MHz, 53MHz Bands
72MHz Band
:
AM or FM
Selectable by changing
modules.
: 9.6V 8/500mAH
: 150mA
Servo FP-S121
Control system
Operating angle
Power requirement
Current drain
Output torque
Dimensions
Weight
+ pulse width control
1520 uS.N
One-side 45° or greater
(including trim)
4.8V
8mA (when stopped)
3.0kg-cm
39.0 x 19.0 x 31.5mm
36g
Receiver FP-R8J
Receiving frequency
Intermediate frequency
Power requirement
Current drain
Dimensions
Weight
Receiving range
: 27MHz, 53MHz Bands
72MHz Band
Selectable by changing
modules.
:455kHz
:4.8V
:
16mA
: 49.0 x 42.0 x 24.0mm
:52g
: With FP-T8JN trans-
mitter
500m on the ground
1000m in the air
Servo FP-S121G
Control system
Operating angle
Power requirement
Current drain
Output torque
Dimensions
Weight
+ pulse width control
160° or greater
4.8V
8mA (when stopped)
3.5kg-cm
39.0 x 19.0 x 31.5mm
36g
: AC110V,50/60Hz,
4VA
: Tx side 9.6V 45mA
Rx side 4.8V 45mA
Charger FBC-2 or FBC-2L
Input voltage
Output
NiCd battery for receiver servo
NR-4H
Voltage
Dimensions
Weight
: 4.8V 4/500mAH
: 32.5 x 32.5 x 57.0mm
:
115g
To Next Page
Loading...
