Water Bee™ Pedal Boat Owner’s Manual and Assembly Guide
Or, if you want to sunbathe, simply lift up the backrest, and rotate it over the adjustment rail until
the backrest hangs over the side of the hull. The seating area, once the backrest has been moved
aside, can double as a comfortable sundeck.
Hydrodynamic/Angled Paddle Blades
Your Water Bee pedal boat possesses paddle blades that are made from extremely durable
polypropylene. For those who are unfamiliar with plastics technology, polypropylene is the same
material used in the design and manufacturing of winter shovels. This means that your paddle
blades will not break when they come into contact with objects below the water’s surface.
Another great feature of the paddle blades is that they are specially angled so that when each
blade hits the water, it does not slap at the water (as is the case in most pedal boats), but rather
grips the water. This not only allows for a smoother, quieter ride, but for superior propulsion and
hydrodynamic performance as well.
Self-Bailing Pedal Wells
At the base of each pedal well of your Water Bee pedal boat there is an aperture that acts to drain
water automatically from your pedal boat. The benefit of these drain holes are that all
contaminants that would have otherwise been left to fester in the pedal well get flushed back into
the water. The self-bailing pedal wells mean the Water Bee will always be ready to use. Owners
and their friends will never again have to spend time emptying their pedal wells after a
rainstorm.
Self-Lubricating and Self-Cleaning Bearings
The Delrin bearings of your Water Bee pedal boat possess large grooves that act to provide both
consistent lubrication and non-stop cleaning action to your drive system. The 100 % non-
corroding bearings act to flush out all sand, salt, and any other materials that may cause
contamination, rusting, or any other damage from occurring.
Integrated Handles
The integrated handles, found at both the front and the rear of your pedal boat allow the user to
easily carry the pedal boat, or to tie it down to a dock.
Future Beach
™ Corporation
The World’s Beach Company
™
12
To Next Page
Loading...
