� Clouding display window of meter
� Corrosion or erosion of the plastic housing and rubber button
� Any damage including corrosion or erosion of the test strip port, speaker hole and
data transport port
� Meter buttons do not function.
� The voice function including volume change does not work.
� Data transfer function from meters to PC does not work.
For more information on cleaning and disinfecting, contact Customer Service at 1
866.890.8500
CAUTION:
� Squeeze the excess liquid from the cloth before you wipe the meter’s surface.
� The meter must be off when you clean or disinfect the meter.
� Do not get moisture on the test strip, test strip port and serial port.
� Do not spray any cleaning solution directly onto the meter.
� Do not put the meter under water or liquid.
� Immersing the meter in liquid will cause damage.
To Next Page
