EasyManua.ls Logo

Future light PHS-250 Pro-Head-Spot - TECHNICAL SPECIFICATIONS

Future light PHS-250 Pro-Head-Spot
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: 230 V/50 Hz
Power consumption: 430 W
DMX-control-channels: 12/14
DMX-512-connection: 3-pin XLR
Flash-rate: 13 Hz
Colour-wheel: 8 dichroic filters and open
Rotating gobo-wheel: 6 gobos and open
Static gobo-wheel: 7 gobos and open
Outside diameter of the gobos: 27 mm
Image diameter of the gobos: 23 mm
Length of base: 400 mm
Width of yoke: 390 mm
Height (head horizontal): 520 mm
Weight (net): 23 kg
Maximum ambient temperature t
a
:
45° C
Maximum housing temperature t
B
(steady state):
70° C
Min.distance from flammable surfaces: 0.5 m
Min.distance to lighted object: 0.5 m
Fuse: T 4 A, 250 V
Fitting lamps:
OMNILUX OSD 70V/200W GY-9,5 2000h 6700K No. 89102005
OSRAM HSD 70V/200W GY-9,5 2000h No. 89102010
PHILIPS MSD 70V/200W GY-9,5 2000h No. 89102015
SYLVANIA 70V/200W GY-9,5 2000h No. 89102020
OMNILUX OSD 90V/250W GX-9,5 2000h 6700K No. 89106005
OSRAM HSD250 90V/250W GY-9,5 2000h No. 89106010
SYLVANIA BA250/2 SE D 90V/250W GY-9,5 No. 89106120
PHILIPS MSD250 90V/250W GY-9,5 2000h No. 89106015
OSRAM HSD250/2 90V/250W GY9,5 3000h 7800K No. 89106110
PHILIPS MSD250/2 90V/250W GY-9,5 2000h No. 89106115
Recommended controllers:
FUTURELIGHT CP-256 controller No. 51834285
Wizard-512 DMX-Software + Interface No. 51860101
Wizard-1024 DMX-Software + Interface No. 51860110
Please note: Every information is subject to change without prior notice. 08/02 ©

Table of Contents