43
Onewheel+ is powered ON and OFF by the pushbutton
switch on the side of the Onewheel+. Always make
sure your Onewheel+ is on the ground in the ready-to-
ride position before switching it “ON.” Always turn your
Onewheel+ “OFF” when charging, storing or carrying it.
WARNING: Never pick up your Onewheel+ when the
switch is in the “ON” position since the wheel may
spin, thus causing a safety hazard.
CAUTION: Do not press the rider-detection area
section of the footpad while powering on your
Onewheel+ or it will not operate.
TIP: Turning on your Onewheel+ while it is not on the
ground will cause an error.
MAIN POWER PUSHBUTTON SWITCH
GETTING TO KNOW YOUR ONEWHEEL+
To Next Page
Loading...