EN
8
Activate Pre-Infusion
a. With the equipment turned off, and the main switch is in position 0,
press for 5 seconds the 1st button on the 1st keyboard. Turn the
main switch to position 2, keeping pressing the button until the
LED on the * key lights up, release the button.
b. Turn the equipment off again, so that the schedule is saved.
Deactivate Pre-Infusion
a. With the equipment turned off, and the main switch is in position 0,
press for 5 seconds the 2st button on the 1st keyboard. Turn the
main switch to position 2, keeping pressing the button until the
LED on the * key lights up, release the button.
b. Turn the equipment off again, so that the schedule is saved.
WATER TANK CONNECTION
Turning the tap to the left will drain the water from the reservoir, the center
will be off, and turning to the right will turn on the mains water.
Note: When the tank is without water, the machine locks and the keyboards
flash.
To Next Page
Loading...