Futurmat F3 User Manual

Futurmat F3 3 Group
940mm
Futurmat F3 2 Group
770mm
570mm
460mm
635mm
360mm
250mm
F3 Pre installation Guide
15 Amp
single phase
male plug
20 Amp
single phase
wall outlet
15 Amp single
phase wall
outlet
20 Amp single
phase wall
outlet
3/8 Cold
Water Male
stop tap
Drainage
20 Amp single
phase power plug
3/8 Cold Water
Male Stop Tap
Drainage
60mm hole in the
bench
10 amp power for
the Grinder/s
M7 Range Of Grinders

Futurmat F3 Specifications

General

Group Heads	2 or 3
Boiler Material	Copper
Weight (2 group)	60 kg
Material	Stainless Steel
Type	Espresso Machine
Water Tank Capacity	N/A (Plumbed)

Summary

FUTURMAT F3 Pre installation Guide

Machine Dimensions and Clearances

Details physical dimensions for Futurmat F3 groups and grinders for placement.

Electrical Power Outlet Requirements

Specifies 10 Amp, 15 Amp, and 20 Amp single phase power outlet requirements for machines and grinders.

Water Supply and Drainage Connections

Details the need for a 3/8 Cold Water Male stop tap and a suitable drainage connection.

Bench and Workspace Preparation

Outlines bench requirements including a 60mm hole and approximate height for installation.

FUTURMAT Site Ready Checklist

Bench Space and Machine Fitment Confirmation

Confirms required bench space dimensions for machine and grinder placement.

Power and Water Site Preparation Verification

Verifies availability of correct power outlets, water tap, drainage, and bench modifications.

Site Accessibility and Operational Readiness

Checks for site accessibility, parking, consumables availability, and staff training needs.