FUXTEC CTL900 - Attaching Rear Bag; Intended Use and Operation; Protective Cover Management

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
8
2.5 Attaching the rear bag
3. Intended use
3.1. Removing and attaching the protective cover
Hook the rear bag into the horizontal frame struts
below the push handle as shown.
Step 1
:
Place the wagon in front of you as shown.
Step 2:
Loosen the two safety clips on the lower part of
the wagon
Step 3:
Open the velcro and pull the protective cover
upwards.
To attach the protective cover, proceed in the
reverse order.