Original User Manual FUXTEC FX-MH126_de_en_fr_rev09
13
• During use, the eyes must focus on the cutting, otherwise the throttle lever must
be reset to "start speed".
• Hold the equipment far enough away from your feet.
MAINTENANCE INSTRUCTIONS
• To ensure proper operation, the equipment must be regularly maintained and
checked according to the instructions in this manual. If it is necessary to replace
any part or perform any maintenance or repair work not described in this
manual, contact your service representative.
• Under no circumstances should the equipment be disassembled or modified in
any way. This could cause damage or operating errors.
• Always switch off the Engine before any maintenance or inspection.
• Always wear sturdy gloves when assembling/disassembling and sharpening the
cutting edge to prevent hand injuries.
To Next Page
Loading...
