Standard Operating Manual FUXTEC FX-MHP126_rev03
9
If you notice an unpleasant feeling or skin discoloration on your hands during use of the
device, stop working immediately. Take sufficient breaks from work. Failure to take
sufficient breaks in work can lead to hand-arm vibration syndrome (white finger
disease).
An estimation of the degree of strain depending on the work or use of the device should
be made and appropriate breaks in work should be taken. In this way, the degree of
stress can be significantly reduced throughout the working time. Minimize your risk of
being exposed to vibrations. Maintain this device according to the instructions in the
user manual.
Avoid using the device at temperatures of 10°C or less. Make a work plan that limits
vibration exposure.
A certain amount of noise from this device cannot be avoided. Do noisy work at
approved and designated times. If necessary, observe rest periods and limit the duration
of work to the absolute minimum. For your personal protection and the protection of
persons in the vicinity, wear suitable hearing protection. National regulations may
restrict the use of this device.
To Next Page
Loading...
Need help?
General
