Original User Manual FUXTEC FX-MSP2.2
16
Air Filter Cleaning
x x
Change by a service dealer
1)
x
Housing
Check x
Replace 1) x x x
Fuel tank Cleaning x x
Carburettor
Check idle speed setting -
tools must not move 2)
x x
Correct Idle Speed x
Spark plug
Correct electrode gap
x
Replace after approx. 100
operating hours
Cooling air inlet Inspection x
Cleaning x
exhaust silencer
Check x x
Have it cleaned or replaced
1)
x x
screws)
Tightening x
Security stickers
Replace x
1) Please contact the service department of FUXTEC GmbH
2) Screw-in the carburettor screw completely, then turn it back on 1.5 turns.