FUXTEC FX-MSP2.2 User Manual

Original User Manual FUXTEC FX-MSP2.2
7
Commissioning of the device
1. Change from liquid to granulate sprayer (e.g., salt)
Remove the side safety nuts (1) of the chemical tank and disassemble the tank
(see next step in fig.2. Remove the spray insert and insert the granule insert (2,
Fig.1).
Fig.1
1. Security screw
2. Granulate insert
3. Granule attachment
4. Cover
Disassembly of the chemical tank
2) Remove the lower cover "A" of the chemical tank, change the spray nozzle
connected to the rubber tube/hose, and screw on the cover "B." (Make sure that
the sealing ring is present to prevent the granules from leaking) as shown in Fig.
3.
Screw on the cover. Loosen the hoses (2+3) and the filter (5).
Fig. 2
1.Use of chemicals
2.Hose
3.Hose
4.Filling filter
5.Cover

FUXTEC FX-MSP2.2 Specifications

General

Brand	FUXTEC
Model	FX-MSP2.2
Category	Paint Sprayer
Language	English