Original User Manual FUXTEC FX-MSP2.2
18
2) Remove the spark plug. Pour 15-20g of engine oil into the cylinder; the engine
oil should be a 2-stroke oil for gasoline engines. Then screw the spark plug back
in.
3) Unscrew the two wing screws. Remove the tank from the device. Clean the
atomizer and the surface inside and outside the chemical tank. If chemical residues
remain in the atomizer, the atomizer may stick and become defective.
4) Afterwards, put the chemical tank back in place and loosen the tank cap.
5) Remove the syringe element and clean it.
6) The whole gasoline mixture should be taken from the gas tank and carburettor.
7) Cover the device with a plastic sheet and store the device dry and dust-free.
To Next Page
Loading...