11.
Maintenance Cycle
The following Data are given from the common use of the
product. Under worse working conditions such as dusty
environment or long work hours of the pile driver, the
maintenance cycle should be shortened correspondingly.
Before work
After work or every day
After Filling oil
Every Week
Every Month
Temporary Failure
If necessary
The whole machine
Outlook check (state, tightness
of screws)
√ √
Clean √
Control handle/stop button Function check √ √
Air Filter
Clean √ √
Replace √
Fuel Filter
Check √
Replace √
Oil can/Oil can cover
Clean √ √
Check √ √
Tighten √
Reduction Gear Box/Impact
Cylinder
Clean √
Add oil √
Silencer
Check √
Remove carbon deposit √
Cylinder Cooling Fin
Check √
Clean √
Spark Plug
Check/Adjust the distance
between electrodes
√
Replace √
Screw and Nut
Check √ √
Tighten √
To Next Page