FUXTEC FX-RM Series User Manual

Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_rev17
57
WARNING: The blade will continue to rotate for a few seconds after the engine is turned off. Unplug the
spark plug connector when leaving the mower unattended.
MOWING INSTRUCTIONS
- In certain circumstances, such as high grass, it may be necessary to raise the cutting height to reduce the
thrust and engine load, which can also lead to grass residue. It may also be required to reduce the basic
speed and push the mower twice over this area
- Reduce the cutting width by covering the previous cut again to perform heavy cutting work
- The pores in the grass catcher bag can become clogged with dirt and dust, which means that the catcher
can pick up fewer cuttings. To avoid this, you should regularly wash the catcher with a water hose and let
it dry completely before reusing it.
- Keep the upper part of the engine around the starter free of grass and chopped grass clippings. This will
improve engine airflow and prolong engine life.
Starting the FX-RM5196eS models
4. Tighten the brake lever (1) to the handle
5. Then start the engine with the start button (2)
6. As soon as you release the brake lever, the engine stops immediately. To empty the grass catcher
box, always remove the brake lever and stop the engine. Otherwise, there is an acute risk of
injury from rotating blades.
1
2

FUXTEC FX-RM Series Specifications

General

Brand	FUXTEC
Model	FX-RM Series
Category	Lawn Mower
Language	English