Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_rev17
62
You can use the EASY CLEAN connection to clean the inner housing
(cutting unit). Simply connect a water hose to the connection on the top of
the housing and slowly turn on the water while the cutting mechanism is
running. The rotation of the cutting mechanism distributes the water
evenly in the inner housing and can thus flush away dirt residues.
The paint on the inner side of the undercarriage may flake off over time
due to aggressive operations. In this case, you should paint over the paint
with rust-resistant paint to protect the undercarriage from the corrosion
of the metal.
Check the V-belt 1-2 times a year and remove any cuttings from it.
Once a year, the drive wheels should be cleaned inside.
Remove both wheels. Use a brush or compressed air to remove grass and dirt from the gear wheel and gear
rim.
27. Mow and Stow Function (FX-RM46BS475IS only)
With the Mow and Stow function, you can store your mower in a space-saving way after work is done. For
this stowing, please proceed as follows:
To Next Page
Loading...
Need help?
General
