ORIGINAL USER MANUAL FUXTEC FX-RME38 rev01
30
Start and stop the mower
Cutting height adjustment
To start the motor, connect the
mower to the power supply using an
extension cord. Then first press the
safety button in the middle of the
panel and keep it pressed. Then pull
one of the levers to start the engine.
Stopping the motor:
Release the lever. The motor stops, but the knife
can still rotate for a few more seconds. Do not
carry out any work on the mower until you are
sure that the blade has stopped completely.
To adjust the cutting height, push
the selector lever towards the
mower and then move it to the
desired position and release the
lever into place.
To Next Page
Loading...
