Need help?Do you have a question about the FW Murphy TTD Series and is the answer not in the manual?
General description of the TTD fault annunciator and its core functions.
Details the TTD display head, its interface, and key components.
Describes the power supply unit and its communication capabilities.
Provides dimensions and mounting instructions for the TTD display and power supply.
Illustrates TTD installation wiring and provides specific connection guidelines.
Explains the LCD display, its backlight, and the meaning of various icons.
Details the functions of the TTD keypad and operational modes like Run and Shutdown.
Describes TTD display indicators and states during shutdown and normal run operations.
Step-by-step guide to enter and navigate TTD setup menus.
Covers password protection and inactivity timeouts for unit configuration.
Configuration of various timers like Pre-lube, Post-lube, and shutdown delays.
Setting up sensor modes, types, and input configurations for the TTD.
Shows the NO/NC configuration for the DD-20 and DD-40 terminal blocks.
Setup for remote features, no-flow detection, and hourmeters.
Settings for speed calibration, tachometer options, and communication parameters.
Configuring output behaviors and assigning a unique unit identification.
Instructions for returning all settings to their original factory defaults.
Procedure for replacing the internal backup battery.
Displays and monitors internal battery, external DC, and ignition voltages.
How to check the firmware versions for the display head and power supply.
Details communication ports, interface types, and protocols like Modbus RTU.
A comprehensive list of Modbus registers with their addresses and descriptions.
Technical data including power requirements, inputs, outputs, and environmental ratings.
List of available replacement parts and assemblies for the TTD unit.
General description of the TTD fault annunciator and its core functions.
Details the TTD display head, its interface, and key components.
Describes the power supply unit and its communication capabilities.
Provides dimensions and mounting instructions for the TTD display and power supply.
Illustrates TTD installation wiring and provides specific connection guidelines.
Explains the LCD display, its backlight, and the meaning of various icons.
Details the functions of the TTD keypad and operational modes like Run and Shutdown.
Describes TTD display indicators and states during shutdown and normal run operations.
Step-by-step guide to enter and navigate TTD setup menus.
Covers password protection and inactivity timeouts for unit configuration.
Configuration of various timers like Pre-lube, Post-lube, and shutdown delays.
Setting up sensor modes, types, and input configurations for the TTD.
Shows the NO/NC configuration for the DD-20 and DD-40 terminal blocks.
Setup for remote features, no-flow detection, and hourmeters.
Settings for speed calibration, tachometer options, and communication parameters.
Configuring output behaviors and assigning a unique unit identification.
Instructions for returning all settings to their original factory defaults.
Procedure for replacing the internal backup battery.
Displays and monitors internal battery, external DC, and ignition voltages.
How to check the firmware versions for the display head and power supply.
Details communication ports, interface types, and protocols like Modbus RTU.
A comprehensive list of Modbus registers with their addresses and descriptions.
Technical data including power requirements, inputs, outputs, and environmental ratings.
List of available replacement parts and assemblies for the TTD unit.
General| Brand | FW Murphy |
|---|---|
| Model | TTD Series |
| Category | Control Systems |
| Language | English |
To Next Page
