F3.5 ID Print Enable
d - Disable the printing of the ID.
E - Enable the printing of the ID.
F3.6 Negative Print Enable
d - Disable printing of negative weights.
E - Enable printing of negative weights (non HB44).
F3.7 24 Hour Clock Enable
d - 24 hour clock disabled (12 hour with AM/PM).
E - 24 hour military time enabled.
F3.8 Preamble Characters
xxxxxx Enables the user to define up to three characters to be sent at the beginning of a
print. The characters are entered in hexadecimal. A value of FF is not transmitted. The
front panel keys are re-defined during this step as follows:
ZERO - Decrements current digit.
TARE - Increments current digit.
GROSS - Selects next digit to the right.
PRINT - Accepts displayed value and advances to next step.
xxxxxx Postamble Characters
Enables the user to define up to three characters to be sent at the end of a print as above
for Preamble.
FSE F4
F4.0 Print Mode
d - Print output disabled.
1 - Print button latches Print Request. Printing will occur when motion ceases and scale
positive.
To Next Page
Loading...