FWC DWM-IV - User Manual

Need help?

Do you have a question about the FWC DWM-IV and is the answer not in the manual?

Summary

Standard Features

Keyboard and Pushbutton Functions

Describes setup, zero, tare, gross/net, print, recall, ID, CN, PC WT, and filter operations.

Data Handling Features

Details Auto Zero Tracking, Numeric ID, CN, Weight Accumulation, and Digital Filter.

Options and Specifications

Device Options

Lists outputs, time/date, setpoints, stands, and enclosures.

Technical Specifications

Details keyboard, display, resolution, rates, and response.

Performance and Environmental Specifications

Performance Specifications

Covers capacity, zero, load cell, sensitivity, and accuracy.

Environmental and Power Specifications

Details temperature, humidity, power, fuse, dimensions, and weight.

Compliance and Warranty

FCC Compliance

Explains RF energy generation and Class B limits.

Manufacturer Warranty

Details FWC's warranty terms and exclusions.

Installation and Handling

Installation Requirements

Covers technician, circuit requirements.

Unpacking and Inspection

Steps for safe unpacking and initial check.

Handbook 44 Requirements

Specifics for Handbook 44 applications.

Grounding Kit Installation

Installation Instructions

Step-by-step guide for grounding kit.

Operating Instructions

Display and Indicators

Explains the main display and status indicators.

Keyboard Functions

Details the primary buttons (ZERO, TARE, GROSS/NET, PRINT, etc.).

Front Panel Functions Overview

Test, Presets, and Feed Control

Explains TEST, PRESET, DRIBBLE, and PREACT functions.

Time and Date Entry

Describes the T/D function for time and date.

Front Panel Data Entry Procedures

Function Entry Guides

Procedures for TEST and PRESET functions (two/single speed).

System Setup and Configuration

Entering Setup Mode

Using DIP switch S1 and buttons to enter setup.

Function Select Enable Descriptions

Overview of F1-F5 configuration groups.

Configuration Settings - F1

Display and Motion Settings

Details F1.0 to F1.3 settings.

Tracking and Key Enable Settings

Details F1.4 to F1.7 settings.

Configuration Settings - F2

Tare Function Settings

Details F2.0 to F2.4 settings.

Power-up and Feed Control Settings

Details F2.5 to F2.8 settings.

Configuration Settings - F3

Serial Communication Settings

Details F3.0 to F3.3 settings.

Print Control Settings

Details F3.4 to F3.8 settings.

Configuration Settings - F4

Print Mode and Data Formats

Details F4.0 to F4.5 settings.

Configuration Settings - F5

Time;Date and Weight Format Control

Details F4.6 to F4.9 settings.

Feature Enable Settings - F5 Part 1

Details F5.0 to F5.2 settings.

Calibration Procedure

Unit, Increment, and Decimal Settings

Details F6.0 to F6.2 settings.

CAL Mode and Linearity

Details F6.3 and F6.4 settings.

Set-Up Procedure Steps

Setup Initiation and Function Selection

Covers CAL switch, panel switches, and FSE.

Calibration Errors and Displays

Calibration Error Codes

Explains CE1-CE5 messages during calibration.

Error Display Messages

Explains OLOAd, LO CAP, and bAd CAL messages.

Programming Steps Summary

Recording Settings

Template for recording final settings for future reference.

Serial Communications

Bi-Directional Communication

Explains communication convention and ASCII codes.

Remote Control and Data Output

Remote Control Inputs

Functions via voltage-free contacts.

Data Output Formats Overview

Selectable formats via setup procedures.

Custom Print Formatting

Custom Print Design

Enabling custom output via F4.7/F4.8.

Print Code Entry and Descriptions

Steps and table for custom codes.

Interface Options

Standard Current Loop Interface

Explains 20mA loop operation.

Connecting Computers;Terminals

Wiring for computer/terminal connection.

Connector Charts and Glossary

Data Interface Connector Chart

Details various connector pinouts.

Glossary Definitions

Explains key terms like Auto Print, Baud Rate.