Data Output: Serial ASCII 20 mA current loop with selectable baud rates (15019.2K),
selectable auto or manual print, continuous data out, or bi-directional communication.
Remote Control Inputs: Zero, Tare, Net/Gross, Print. Requires voltage-free contacts.
Enclosure: NEMA-12 wall mount/dust-tight.
Options:
Outputs: Dual port serial RS-232, RS-422, RS-485, and/or 20mA current loop; Parallel
BCD; Analog 4-20mA or 0-5 VDC.
Time and Date: Battery backed up time and date with selectable 12 or 24 hour mode.
Setpoints: Up to six (6) single speed or three (3) two speed setpoints with Zero
Interlock and Fill Complete output.
Table Stand: Provides 60 degree angle mount stand for wall mount enclosure.
N4S Enclosure: NEMA-4 Stainless Steel watertight wall mount enclosure.
Custom Systems: Flex-Weigh offers full engineering support for customized systems.
Contact your local dealer for further details.
Specifications:
Keyboard: Sealed keyboard with tactile keys.
Display: 6 digits and (-) sign. Seven (7) segment, 0.5" high blue vacuum fluorescent
type, with annunciators for: function select, center zero, tare, net, pieces, F1, and F2.
Internal Raw Count: 100,000 counts maximum.
Display Resolution: 1 part in 10,000 maximum Legal for Trade, 1 part in 24,000
extended, 1 part in 100,000 maximum in high resolution mode.
Display Increments: x1, x2, x5, x10, x20, x50, x100.
Decimal Point Location: Selectable 14 places to the left.
A/D Conversion Rate: 15 updates per second.
Response Time: Zero (0) to full scale capacity, selectable to 0.5 to 4 seconds.
Display Rate: Selectable 0.25, 0.5, 1, 2, 5, 10, or 20 updates per second.
To Next Page
Loading...