11
Assure the unit is not directed at anybody or any
loose debris before starting the unit.
Verify that the unit is in good working condition. Make
sure the tubes and guards are in place and secure.
Always hold the unit with both hands when operating.
Keep a firm grip on both the front and rear handle or
grips.
To reduce the risk of hearing loss associated with
sound level(s), hearing protection is required.
Use the shoulder strap when using unit as a mulcher.
To reduce noise levels, limit the number of pieces of
equipment used at any one time.
Use rakes and brooms to loosen debris before
blowing.
Watch out for children, pets, open windows or freshly
washed cars, and blow debris safely away.
Clean up after using blowers and other equipment.
Dispose of debris appropriately.
AIR VENTS
Never cover air vents. Keep them free from
obstructions and debris. They must always remain
clear for proper motor cooling.
WARNING! To avoid serious personal injury, do not
wear loose fitting clothing or articles such as scarves,
strings, chains, ties, etc., that could get drawn into the
air vents. To make sure long hair does not get drawn
into the air vents, tie back long hair.
OPERATING AS A BLOWER
Hold the blower firmly. Sweep from side to side with
the nozzle several inches above the ground or floor.
Slowly advance the unit, keeping the accumulated pile
of debris in front of you.
OPERATING AS A MULCHER
Hold the vac firmly, tilting the mulcher tubes (2-4 in. or
5-10 cm), and use a sweeping action to collect light
debris. The debris will flow into the bag. Items such as
small leaves and twigs will be mulched as they pass
through the fan housing. For longer bag life and
increased performance, empty the bag often.
CLEARING A BLOCKED TUBE / IMPELLER
WARNING! To avoid serious personal injury, be sure
the unit is OFF and unplugged before clearing the
impeller. To avoid serious personal injury, always wear
gloves to protect yourself from the impeller blades or
other sharp objects.
Make sure the unit is not turned On.
Unplug the unit.
Remove the blower tube or mulcher tubes and the
bag.
Carefully remove material blocking the tube or
impeller. Inspect the blades to ensure no damage has
occurred. Rotate the impeller blades by hand to
ensure the blockage is completely cleared.
Reinstall the blower tube or mulcher tubes and the
bag.
Plug the unit back into the power supply.
MAINTENANCE
WARNING! To avoid serious personal injury, always
turn the unit off and unplug it before cleaning or
servicing.
Use a small brush to clean off the outside of the unit.
Do not use strong detergents, household cleaners that
contain aromatic oils such as pine and lemon, and
solvents such as kerosene as they can damage plastic
housings or handles. Wipe off any moisture with a
soft, dry cloth.
CLEANING THE BAG
Empty the bag after each use to avoid deterioration
and obstructing air flow, which will reduce the
performance of the mulcher.
Wearing eye protection and a dust mask, clean the
bag as needed. Turn the bag inside out after initial
emptying and vigorously shake out dust and debris.
Wash the bag once a year, or more often if needed:
1. Remove the bag.
2. Turn bag inside out.
3. Hang it up.
4. Hose it down thoroughly.
5. Leave it hanging to dry.
6. Turn bag right-side out and reinstall.
STORAGE
Store the unit locked up to prevent unauthorized use
or damage.
Store the unit in a dry, well-ventilated area.
Store the unit out of the reach of children.
TECHNICAL SPECIFICATION
Voltage 230 V~ 50 Hz
Rated input 1800W
Air velocity 60 m/s
Air volume 12m
3
/min
Mulch ratio 16:1
Collection bag capacity 40L
Sound Pressure Level L
pA
90.6dB(A)
Sound Power Level L
WA
100.4dB(A)
Vibration Level 4.17m/s
2
To Next Page
Loading...