This document describes the Shortwave Infrared Paint Curing System, Model No: FY-1W, a device designed for efficient paint curing applications. The system utilizes shortwave infrared technology to accelerate the drying and hardening process of paint, offering a controlled and effective method for achieving optimal paint finishes.
Function Description:
The primary function of the FY-1W system is to cure paint using shortwave infrared radiation. This process involves exposing painted surfaces to infrared emitters, which generate heat that penetrates the paint layer, promoting faster drying and cross-linking of paint molecules. This results in a durable and high-quality finish in a shorter timeframe compared to traditional air-drying methods. The system is specifically designed for paint curing and requires careful operation to prevent damage to the paint surface.
Important Technical Specifications:
The FY-1W model operates with a single-phase power supply and has the following key technical parameters:
- Power Supply: 220V, 50/60Hz, Single Phase. This indicates its compatibility with standard electrical outlets in many regions.
- Input Power: 1100W. This specifies the electrical power consumed by the device during operation.
- Curing Area: 800×500mm. This defines the maximum area that can be effectively cured by the system at one time, suggesting its suitability for medium-sized panels or sections.
- Temperature: 40°C - 75°C. This range indicates the operational temperature of the curing process, which is crucial for different types of paint and desired curing results.
- Timer: 0min - 60min, Adjustable. The adjustable timer allows users to set precise curing durations, catering to various paint specifications and project requirements.
- Light Intensity: 100%. This parameter suggests a consistent and full-power output from the infrared emitters during operation.
Usage Features:
The FY-1W system is designed with user convenience and optimal curing results in mind, incorporating several features to facilitate its use:
- Adjustable Positioning: The equipment is able to move upwards, downwards, and rotate 360°. This flexibility allows users to position the infrared emitters precisely over the painted surface, ensuring even and effective curing regardless of the object's shape or orientation. This feature is crucial for targeting specific areas and accommodating different workpieces.
- Control Panel: The system includes a straightforward control panel with an ON/OFF switch and a TIMER dial. The timer is marked from 0 to 60 minutes, enabling users to easily set the desired curing duration.
- Optimal Emitter Placement: For best results, the emitters should be positioned parallel to the paint surface. A recommended distance of 30-60 cm from the panel is advised to achieve optimal curing without causing damage.
- Clean Surface Requirement: During the curing process, it is essential that the paint surface is clean and free from water and impurities. This ensures proper adhesion and a flawless finish.
- Simple Operation Sequence: To operate, users first set the curing time according to the paint requirements, then switch on the power supply to initiate the curing process.
Maintenance Features:
The manual emphasizes several aspects related to the maintenance and care of the FY-1W system to ensure its longevity and safe operation:
- Easy Installation and Low Operating Costs: The system is designed for easy installation and aims for low operating costs and minimal maintenance, making it a practical choice for paint curing needs.
- Warranty Coverage: The warranty does not cover lamp tube defects resulting from misuse or improper operation, highlighting the importance of following operational guidelines.
- Power Disconnection: Users are advised to disconnect the power source when the equipment is not in use for extended periods. This is a standard safety and energy-saving practice.
- Proper Lamp Tube Orientation: It is crucial that the lamp tube is not positioned perpendicular to the ground when the equipment is operating, as this can shorten the life of the lamp tube. This specific instruction points to a design consideration that affects component lifespan.
- Safe Storage: After use, the equipment should be turned off and placed in a safe location to prevent damage to the lamp tube. This emphasizes the fragility of the infrared emitters and the need for careful handling.
- Qualified Personnel for Installation and Service: Installation and service must be performed by a qualified installer or service agent. This ensures that any technical work on the device is carried out safely and correctly, preserving the equipment's integrity and operational safety.
In summary, the Shortwave Infrared Paint Curing System (Model No: FY-1W) is a specialized tool for professional paint curing, offering precise control over the curing process, flexible positioning, and straightforward operation, all while emphasizing safety and proper maintenance for extended service life.
Need help?
To Next Page
General