STEP 3 – PASO 3- ETAPE 3 - FASE 3 - STEP 3 – STAP 3:
See picture: interlock the left and right stand pipe protective cover onto the side pipe, push them forward towards the
stand pipe, use two ⑤ 4* ST4X15 screws to screw them up. Check again and then place the machine at the right
position, plug in the power and switch on, place the safety lock at the right position on the electronic watch, then it’s
ok to use.
HOW TO FOLD AND MOVE THE TREADMILL / CÓMO PLEGAR Y MOVER LA MÁQUINA
PARA CORRER / COMMENT PLIER ET DÉPLACER LE TAPIS DE COURSE / PIEGATURA E
SPOSTAMENTO DEL TAPIS ROULANT / ZUSAMMENKLAPPEN UND TRANSPORTIEREN / DE
LOOPBAND INKLAPPEN EN VERPLAATSEN
To Next Page
Loading...
