FYTTER runner RU-9X - Common Errors; Errores Comunes; Erreurs Communes; Gli Errori Piu Comuni; Häufige Fehler; Veelvoorkomende Fouten

FYTTER |WWW.FYTTER.COM
PAG- 34
11.
COMMON ERRORS / ERRORES COMUNES / ERREURS COMMUNES / GLI ERRORI PIU COMUNI / HÄUFIGE
FEHLER / VEELVOORKOMENDE FOUTEN
Error Code
Reason
E-01
Check the sensor wire if well connected, make sure the distance is 3-5mm.
E-02
Too much load, input voltage to high, turn off power and restart.
E-03
Over 15A input current, turn off power and restart.
E-04
Check motor power wire and signal wire if well connected.
E-06
Check the signal wire if well connected.
E-07
Check the safety key if on or not.
E-09
Check the incline motor if well connected.