2 Pack List
When unboxing your electric scooter, please verify that the above items are included in the package. If you are missing any compo-
nents. Please contact us through support@g-cycle.com. After verifying that all components are present and in good condition, you
can assemble your new electric scooter.
Please retain the box and packaging materials in case you need to ship your electric scooter in the future.
Remember to power o your electric scooter and unplug the charging cable before assembling, mounting accessories, or cleaning the
mainframe.
6.2 Power on the scooter and check the battery level indicator.
Charge the scooter if the battery level is low.
6 How to Get Started
6.1 Wear an approved helmet and other protective gear to
minimize any possible injury.
6.4 Put another foot on the deck to keep both feet stable.
Press the throttle on your right hand to speed up when you
are balanced.
6.3 Stand on the deck with one foot and push o with another
foot to start gliding. Note: For your safety, the motor will not
engage until the scooter reaches 1.8mph (3km/h) .
3
7
To Next Page
Loading...