To Next PageTo Next Page
Need help?Do you have a question about the G.T.Power A8 and is the answer not in the manual?
General| Charge Power | 150W |
|---|---|
| Discharge Power | 20W |
| Input Voltage | DC 11.0~18.0V |
| Charge Current | 0.1-10A |
| Discharge Current | 0.1-5A |
| LiPo/LiFe/LiIon Cell Count | 1~6S |
| Pb Battery Voltage | 2~20V |
| Battery Types | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| Display | LCD |
| Charging Modes | Storage, Discharge |
| NiMH/NiCd Cell Count | 1-15 cells |
| Cell Count | Li-Po/Li-Fe/Li-Ion: 1-6 cells, NiMH/NiCd: 1-15 cells |
| Cooling System | Built-in cooling fan |
Covers optimized software functions, high-power circuit capabilities, and performance aspects.
Details individual cell balancing, acceptance of various Lithium types, and Fast/Storage modes.
Details safety features like delta-peak, auto-charge limit, capacity, and temperature limits.
Details data storage for up to 10 batteries and PC analysis via USB.
Lists available multi-use wires and connectors for convenient charging.
Identifies key external parts of the charger unit, including ports and screen.
Illustrates the correct connection diagram for lithium battery balance charging.
Provides essential safety guidelines for operating the charger and handling batteries.
Lists voltage levels, charge/discharge limits for various battery types (NiCd, LiPo, Pb).
Diagram outlining the sequence for Lithium battery charging and discharging programs.
Diagram detailing the program flow for NiMH and NiCd battery operations.
Flowchart for the Lead-Acid battery charging and discharging programs.
Outlines the program flow for saving and loading battery data.
Diagram showing the user-defined parameter setup sequence.
Covers user setup navigation, Lithium battery type selection, and cell count verification time.
Details NiMH/NiCd sensitivity, temperature cut-off, cyclic delay, trickle charge, and safety timer.
Covers capacity cut-off, input power protection, and LCD backlight adjustment.
Details on charging Lithium batteries using CV/CC method and setting current/voltage.
Procedure for balancing individual cell voltages during Lithium battery charging.
Utilizing the 'FAST' charge mode to reduce charging time for Lithium batteries.
Using 'STORAGE' mode to set Lithium batteries to an optimal voltage for long-term storage.
Procedure for discharging Lithium batteries, including current and voltage settings.
Monitoring individual cell voltages during discharge and identifying abnormal cells.
Instructions for charging NiMH and NiCd batteries, including 'Auto' and 'Manual' modes.
Procedure for discharging NiCd and NiMH batteries with current and voltage settings.
Using charge-discharge cycles for NiMH/NiCd battery refresh and break-in.
Guidelines for charging Lead-Acid batteries, emphasizing low current and correct voltage.
Procedure for discharging Lead-Acid batteries, specifying discharge current and voltage.
Storing battery specifications for up to 10 different batteries for quick recall.
Recalling previously saved battery data to set up charging or discharging programs.
Displays final voltage and charged capacity upon completion of a process.
Shows safety timer duration and current temperature readings (internal/external).
Displays input DC power voltage and individual cell voltages for Lithium batteries.
Messages for reverse polarity and connection break errors during operation.
Alerts for input voltage issues, volume selection errors, and short circuits.
Indicates low/high battery voltage, cell voltage issues, and cell connection faults.
Messages related to excessive temperature or control system failures.
