To Next PageTo Next Page
Need help?Do you have a question about the G.T.Power X-Charger and is the answer not in the manual?
Power| operating voltage range | 10.0~18.0 Volt |
|---|---|
| circuit power for charging | max. 50W |
| circuit power for discharging | max. 5W |
| charge current range | 0.1~6.0 A |
| discharge current range | 0.1~1.0 A |
| current drain for balancing Li-po | 300 mAh/cell |
| Pb battery voltage | 2 to 20 V |
Battery| NiCd/NiMH battery cell count | 1~15 cells |
|---|---|
| lithium battery cell count | 1~6 cells |
Weight and Dimensions| weight | 300 g |
|---|---|
| dimension | 137×98×30 mm |
Covers Delta-peak, capacity, temperature, and time limits for safe charging.
Advises on handling, environment, power source, and flammable materials.
Lists voltage and current limits for NiCd, NiMH, LiPo, LiFe, and Pb batteries.
Instructions on wire connection, disassembly, and Lithium battery pack configuration.
Setting the nominal voltage for LiFe, LiLo, and LiPo batteries.
Explains nominal voltages, charge modes (CV/CC), and setting charge current.
Step-by-step guide for setting up and starting Lithium battery charging.
Using the balance port to monitor and control individual cell voltages during charging.
Details on setting charge current in Automatic or Manual modes.
Setting discharge current and nominal voltage for NiMH/NiCd batteries.
Lists and explains various error codes and their meanings displayed by the charger.
