p.12
Using Your Drive on Mac
Disconnect the Drive
A great feature of G-RAID is its ability to connect and disconnect while your
computer is running. To prevent failures and/or data loss, it is important to follow
the steps below when disconnecting or ‘unmounting’ the drive from your computer.
1. Before powering down and disconnecting the drive, unmount the system
by simply dragging the G-RAID icon to the trash located in the dock.
Keyboard shortcut: Select the drive icon and hit Command+E.
2. It is safe to remove the drive from your system when the drive icon is no
longer present on your desktop.
3. To power off G-RAID, press and hold the On/Off power button until the unit
shuts down.
Helpful links
• To use G-RAID on Windows, go to Windows Use.
• To use G-RAID on Mac and Windows together, go to Cross Platform Use.
disconnect
To Next Page
Loading...
