p.25
Using Your Drive on Windows
Cross Platform Use
You can set up G-RAID for use on both Windows and Mac system by formatting
the drive as ‘FAT32’. To do this, use the Disk Utility application and format the
drive to MS-DOS (FAT), also known as FAT32.
1. First, open the Disk Utility program. This application is located on your hard
drive under Applications/Utilities/Disk Utility. The window below will appear.
Your G-RAID will be displayed in the left-hand column.
2. Select the G-RAID by clicking on its drive icon in the left-side column.
Information about the drive will be displayed at the bottom of the window.
3. Select the Erase tab to view the formatting options.
crossplat
To Next Page
Loading...
